NOXA PRIME Series Wall-mounted units
Close to ceiling
installation
Fitted
condensate drain
Quiet
operation
Double
Coanda effect
Installation
close to the ceiling
The redesigned air intake, located on the front facing panel and the new heat exchanger design, made it possible to
install the wall units only 3cm away from the ceiling
Standard wall-mounted unit
min. 15cm from the ceiling.
New wall-mounted unit from Noxa
min. 3cm from the ceiling.
Thanks to the most modern technology based on the double coanda effect, the user can adjust the unit’s louvre in cooling mode so that the cold air is directed upwards, ‘sticking’ to the ceiling and bypassing the people present in the room. In heating mode, warm air is directed vertically downwards along the wall, then rises upwards to create a pleasant feeling of thermal comfort with optimum distribution.
Airflow
in a competitive unit
Cold airflow pattern
with coanda effect
Airflow
in a competitive unit
Warm airflow pattern
with coanda effect
3d Airflow
Vertical and horizontal louvres can be set at 5 angles, providing a sense of 3D air distribution throughout the room.
Up / down
Right / left
Advanced
heat exchanger
The innovative C-type heat exchanger improves condensate drainage and reduces the accumulation of air-pollution. Precise fan control allows for maintaining a stable air flow between subsequent services.
Customized
condensate drainage
Convenient location of the condensate drain is also one of the factors influencing the possibility of mounting the wall unit as little as 3 cm from the ceiling. The device is equipped with a condensate pump as standard. The maximum value of the condensate lift is 1.2 m.
Air purification
support
The NOXA PRIME wall units are equipped, as standard, with a basic G1 class air filter, Thanks to the filter indoor units really support air purification in rooms were the system is operating. The filters also extend the time between subsequent servicing.
TECHNICAL DATA wall-mounted units
| Model | NXVM-ID05BWM-1F | NXVM-ID07BWM-1F | NXVM-ID09BWM-1F | NXVM-ID12BWM-1F | ||
|---|---|---|---|---|---|---|
|
Power supply |
(V/faza/Hz) |
220-240/1/50 |
||||
|
Cooling |
Rated capacity1 |
kW |
1.5 |
2.2 |
2.8 |
3.6 |
|
Input power |
kW |
0.018 |
0.021 |
0.024 |
0.027 |
|
|
Heating |
Rated capacity2 |
kW |
1.7 |
2.4 |
3.2 |
4 |
|
Input power |
kW |
0.018 |
0.021 |
0.024 |
0.027 |
|
|
Airflow3 |
m3/h |
460/440/420/400/ |
500/470/440/410/ |
540/510/470/430/ |
580/540/500/460/ |
|
|
Sound pressure level4 |
dB(A) |
32/31/30/30/ |
33/32/31/30/ |
35/34/33/32/ |
37/36/34/33/ |
|
|
Sound power level6 |
dB(A) |
45/44/43/43/ |
46/45/44/43/ |
50/49/48/47/ |
54/53/51/50/ |
|
|
Unit dimensions |
Dimensions |
mm |
750×295×265 |
750×295×265 |
750×295×265 |
750×295×265 |
|
Weight |
kg |
9 |
9 |
10 |
10 |
|
|
Refrigerant |
R410A/R32 |
|||||
|
Refrigerant flow control |
typ |
electronic expansion valve |
||||
|
Piping |
Liquid/gas |
mm |
Ф6.35/Ф12.7 |
Ф6.35/Ф12.7 |
Ф6.35/Ф12.7 |
Ф6.35/Ф12.7 |
|
Condensate |
mm |
OD Ф16 |
||||
| Model | NXVM-ID15BWM-1F | NXVM-ID18BWM-1F | NXVM-ID24BWM-1F | NXVM-ID28BWM-1F | ||
|---|---|---|---|---|---|---|
|
Power supply |
(V/faza/Hz) |
220-240/1/50 |
||||
|
Cooling |
Rated capacity1 |
kW |
4.5 |
5.6 |
7.1 |
8 |
|
Input power |
kW |
0.03 |
0.04 |
0.05 |
0.065 |
|
|
Heating |
Rated capacity2 |
kW |
5 |
6.3 |
8 |
9 |
|
Input power |
kW |
0.03 |
0.04 |
0.05 |
0.065 |
|
|
Airflow3 |
m3/h |
720/670/620/560/ |
860/780/700/620/ |
1220/1120/1030/940/ |
1380/1260/1140/ |
|
|
Sound pressure level4 |
dB(A) |
37/35/33/32/ |
41/39/37/35/ |
44/42/40/38/ |
45/43/41/39/ |
|
|
Sound power level6 |
dB(A) |
54/52/50/49/ |
56/54/52/50/ |
58/56/54/52/ |
60/57/55/53/ |
|
|
Unit dimensions |
Dimensions |
mm |
950×295×265 |
950×295×265 |
1200×295×265 |
1200×295×265 |
|
Weight |
kg |
11.5 |
11.5 |
15 |
15 |
|
|
Refrigerant |
R410A/R32 |
|||||
|
Regulacja przepływu czynnika |
typ |
Refrigerant flow control |
||||
|
Piping |
Liquid/gas |
mm |
Ф6.35/Ф12.7 |
Ф6.35/Ф12.7 |
Ф9.52/Ф15.9 |
Ф9.52/Ф15.9 |
|
Condensate |
mm |
OD Ф16 |
||||
Capacity is based on the following conditions:
1. Cooling: indoor temperature 27°C DB/19°C WB; outdoor temperature 35°C DB/24°C WB. Refrigerant piping length 7,5m for the 0 height difference.
2. Heating: indoor temperature 20°C DB/15°C WB; outdoor temperature 7°C DB/6°C WB. Refrigerant piping length 7,5m for the 0 height difference.
3. Airflow is given from the highest to the lowest speed.
4. Sound pressure level is given from the highest to the lowest speed. Pressure level measured in an anechoic chamber, at a distance of 1.0m in front of and 0.8m under the unit.
5. The specified dimensions are the maximum external dimensions of the unit, including fittings.
6. Sound power level is given from the highest to the lowest speed
Dimensions
wall-mounted units
| Model | A | B | C | D | E |
|---|---|---|---|---|---|
|
1,5~3,6 |
750 |
295 |
265 |
581 |
736 |
|
4,5~5,6 |
950 |
295 |
265 |
781 |
936 |
|
7,1~8,0 |
1200 |
295 |
265 |
1025 |
1186 |
