NOXA PRIME
a multi-type
air conditioning system
The PRIME series is an extension of the range of multi-type air conditioning systems in the NOXA brand with a technologically advanced system that is distinguished by higher efficiency, flexibility and ease of installation than previously available on the market, as well as the possibility of integration with various indoor units. The power of the NOXA PRIME system ranges from 8 kW to 16 kW, which is ideal for all types of small and medium-sized buildings.
Thanks to the high-power PRIME outdoor units (up to 16 kW), it is possible to operate from 1 to 9 indoor units of different types on one outdoor unit. This significantly saves the installation area of the unit and minimizes interference with the aesthetics of the building and its surroundings.
The compact dimensions of the device ensure saving of space needed for the installation of the unit. The small dimensions of the device allow for transport by elevator, which significantly facilitates installation and reduces the amount of work and installation costs.
In the case of NOXA PRIME units, there is a space available from every side for connecting pipes and cables in various installation locations.
Thanks to “Y” joints and multi-port distributors (from 2 to 6 ports), it is possible to reduce the installation costs of the PRIME system by up to 50%. Such yields are possible thanks to the use of less cooling copper.
Installation using “Y” joints
Installation using multi-port distributors
Installation using “Y” joints and multi-port distributors
A longer installation route allows for more flexible design of air conditioning systems.
Flexibility in design
thanks to installation
length of up to 100 m
The NOXA PRIME system enables the freon installation of a maximum length of up to 100 m, which significantly increases design flexibility compared to standard multi split systems (85 m).
| Table Header | Table Header | Table Header | Table Header | Table Header | ||
|---|---|---|---|---|---|---|
|
Installation lenght / Height difference |
8 kW |
10-12 kW |
14-16 kW |
|||
|
Total installation length |
|
60 m |
80 m |
100 m |
||
|
1. Maximum length |
actual |
35 m |
35 m |
45 m |
||
|
2. Maximum length of the |
|
20 m |
20 m |
20 m |
||
|
3. Maximum level difference |
ODU above |
10 m |
20 m |
30 m |
||
|
4. Maximum level |
|
10 m |
10 m |
10 m |
||
In the case of NOXA PRIME it takes one signal wire for one system. This makes wiring quicker and easier. The efficiency of the installation is higher and its costs are lower.
auto
mode
The air conditioning system automatically switches between cooling and heating modes, adapting to changing ambient conditions.
right-of-way
priority
The priority function allows the air conditioning system to operate in the same mode as the first unit was started. Subsequent units start in the same mode as the first unit.
heating
priority
The air conditioning system will tend to work in heating mode. Even if several indoor units are working in cooling mode, if one indoor unit receives a signal from the controller to work in heating mode, the entire air conditioning system will go into heating mode.
cooling
priority
The air conditioning system will tend to work in cooling mode. Even if several indoor units are working in heating mode, if one indoor unit receives a signal from the controller to work in cooling mode, the entire air conditioning system will go into cooling mode.
only
cooling
The air conditioning system can only operate in cooling mode.
only
heating
The air conditioning system can only operate in heating mode.
The NOXA PRIME system operates effectively in a wide temperature range. In cooling mode from -15°C up to 55°C, and in heating mode from -20°C to 27°C.
Ecological
and efficient air
conditioning system
The R32 refrigerant used in NOXA PRIME air conditioning system has a low environmental impact. The GWP (Global Warming Potential) is only 675. The system also has high energy efficiency (SEER up to 7.5, SCOP up to 4.6). The outdoor units are equipped with energy-saving DC compressors and DC fans, which, in addition to efficient operation, also ensure a low noise level (54–57 dB (A)).
NOXA – a brand with an ideal portfolio of HVAC devices
The NOXA brand was created almost a decade ago in Poland as a response to the needs of customers who primarily expect devices:
Within the NOXA brand, you can find an optimal range of devices in the field of freon air conditioning, ventilation, heat pumps, as well as chilled water solutions. The range of proposed devices fits into the design requirements of most facilities. Additionally, the proven quality of the devices and attractive warranty periods ensure their uninterrupted operation.
The distributor of the NOXA
brand is Aircon Sp. z o.o
An experienced Polish distributor of HVAC solutions. The company provides a wide range of devices and supporting services.
Main warehouse of NOXA
brand devices
The main warehouse of NOXA devices is located in Kobyłka near Warsaw, which guarantees excellent availability and efficient logistics of devices throughout the year.
We deliver devices to almost
every country in Europe
We are gradually developing a network of permanent foreign partners providing local distribution services. All devices in the NOXA brand portfolio meet all European legal, energy and ecological standards, and the group of their users in Europe is constantly growing.
Aircon Sp. z o.o.
ul. Logistyczna 5
05-230 Kobyłka
+48 22 811 30 28
biuro@noxa.pl
Aircon Sp. z o.o.
ul. Logistyczna 5
05-230 Kobyłka
+48 22 811 30 28
biuro@noxa.pl
